Miata 1990-2005: Engine : Fuel

Fuel Cap Replacement :: 90-95

Aftermarket but perfect copy of the factory cap.

Customers who bought Fuel Cap Replacement :: 90-95 also often bought:
	Quality Rubber Shift Boot - Large--::90-05 Torn rubber shift boots allow fumes and extra noise into the interior. If you have noticed a change for the worse in your Miata it is time to change one or both of the factory boots. The smaller, lower boot, sits on top of the transmission at the... More Info
	McGard Spline Drive Tool This is the tool for McGard Spline Drive lugs. More Info
	Hubcentric Ring set to Fit Miata 73/54 Most modern aftermarket rims are made with an oversize center bore and the centering ring brings that bore size down to the Miata hub fitment of 54.1 mm. If you have a Miata, these help properly fit your new alloys. Price is for set of FOUR rings. More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton