Good-Win Racing Mazda Performance Parts

Racing Beat RX7 Race Header

1986-1988

RX7 1979-1995 · Exhaust


Part Number: 11-1026RX7

Application: 1986-1988

Price: $298.00

Quantity:

Racing Beat RX7 Race Header
rating (0 Ratings)
rating (0 Ratings)

Thank you. You have rated this product.

Road Race Header (w/ 6-port actuator pick-up tube and oxygen sensor position for use on a 1986-88 RX-7 13B) - This model Road Race Header is intended to bolt-up to the Road Race Presilencer section. Please note that this header is not compatible with the Street Port Center Section for the earlier 1984-85 RX-7 GSL-SE - only with the Road Race Presilencer section referenced above.

Racing Beat's Road Racing Header is the first step in building a serious racing exhaust system. The engine-to-pipe flange is laser cut from 7/16" thick flat steel for superb exhaust gas sealing qualities. Like all of the Racing Beat headers, the Road Racing Header is constructed with 2" OD mild steel tubing, .120" wall thickness, and mandrel-bent tubing throughout. This header weighs approximately 15.5 lbs and is approximately 28" in length.

On the 1986-88 13B 6-Port engines, the auxiliary intake actuators are operated by backpressure from the exhaust system. This header features a backpressure pick-up tube that allows for the correct operation of the 6-port intake actuators.

Also included on the header is an oxygen sensor position for cars that require an oxygen sensor for correct operation. Outlet flange gaskets, bolts, nuts, AC and CV cover plate, and installation instructions are included. An Engine-to-Header gasket is not included, but is available separately if needed.

*** Product images may differ from actual product appearance ***

REVIEWS

Brian, just wanted tyou to know you've got another highly satisfied customer. I got my RoadstersportIII muffler on Friday, installed it in 20 minutes, looks and sounds awesome. I like the baffles out!! My new tires/wheels came Saturday, just got them on and test drove them. Fantastic!! And how they look--- just what I was after. I will add the front "mud flap" that looks like the rear one, for some stone protection, but the offset was just what I was working for. I'd love to send you some pictures for your photo gallery. If you'll send an adress via e-mail, I'll send some high-res photos showing clearances and side profiles, etc. The graphite spokes and polished rims really set well on my black car. Thanks again, me and my wallet will be back!!

-- Ken

I should thank you. The parts ordered have greatly enhanced my MX-5 and they were received well before I could have reasonably expected them. I'm an enthusiastic new customer. Regards, John

-- John W.