DESCRIPTION
Torn rubber shift boots allow fumes and extra noise into the interior. If you have noticed a change for the worse in your Miata it is time to change one or both of the factory boots.The smaller, lower boot, sits on top of the transmission at the base of the shifter, and the larger under the center console.
SOLD SEPARATELY...this "Small" boot is the lower one in the picture. INSTALLATION: You need to lube it up to get it on, white grease works well. Care should be taken to push on the rubber, not the flange, as the part is moved down the shifter (if you push on the flange the rubber will separate and make the part useless).
CUSTOMERS WHO BOUGHT THIS ITEM ALSO BOUGHT
McGard Spline Drive 16 Silver Lug Nuts and Tool Set
MIATA NA/NB 1990-2005
TEAM RECOMMENDATIONS
Customer Reviews
Quality Rubber Shift Boot - Small
The original small inner boot on my 2002 was all torn up, allowing heat and noise up from the trans tunnel (and possibly dirt down into the trans turret. Replacing both the small inner boot and the larger top boot drastically reduced the amount of heat on the trans tunnel at my right knee. Do both boots at the same time since you have everything off.
Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)