Thank you. You have rated this product.
Rated for increased clamping pressure of 52% and will take the abuse of autocross and track days and low boost applications. Like our ACT HD, this clutch will also give you a slightly stiffer clutch pedal (about 20% stiffer).
But this EXEDY clutch gives a more stock-like release curve....very much like the factory clutch release curve! Kit comes complete with everything you need for installation including Pressure Plate, Clutch Disc, Throw Out Bearing, Pilot Bearing and Clutch Alignment Tool. Fits 6 Speed Only.
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel. 13 pounds!
BRIAN'S APPLICATION NOTES: The other guys will push a light flywheel on you under 10 pounds for any application. Though we have choices under 10 pounds for the racers out there, including the lightest NC setup available (our carbon/carbon setup with COMBINED weight of just 16 pounds for flywheel AND clutch), the average STREET Miata driver will likely NOT want it that light. Why? Because ultra light can result in quite a bit of Miata clutch and transmission CHATTER, particularly as your Miata transmission gets older and older. So, for our customers driving their Miata 90% of the time on the street or more, this is the FUN yet QUIET upgrade that won't annoy you with lots of chatter.