Miata 1990-2005: Radiators, Cooling : Oil

Cool-Tek Miata Oil Filter Relocation Kit :: 90-04

Just the relocation kit which mounts between filter head and firewall spacing the filter away from the ABS lines...does not include the optional heat exchanger shown here or the optional thermostat shown here.

Customers who bought Cool-Tek Miata Oil Filter Relocation Kit :: 90-04 also often bought:
	Hawk Blue Brake Pad Set - FRONT::90-93 For track duty! Not a street pad! Temperature range 500-1000 degrees. Hawk recommends if another brand of carbon pad has been used on rotors previously, before using any Hawk compound pads, resurface or replace the rotors. More Info
	A-Pillar Gauge Pod--Triple Gauges::90-97 The Miata does not come with a natural location to mount gauges but we can fix that. Here we present the latest technology in Miata Gauge Pod Pillars. This completely replaces your stock Miata A-Pillar panel while incorporating pods for two gauges. ... More Info
	MazdaSpeed Competition Adjustable Sway Bar Endlinks::90-97 A great increase in stiffness over stock bushings. Note that as compared with the Racing Beat endlinks they appear much cheaper but they are NOT because while the Racing Beat endlinks are sold by the pair, these are sold individually! So, if you want... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton