Miata 1990-2005: Radiators, Cooling : Radiator

KOYO Miata Radiator OEM Replacement (PLASTIC end tank)--AUTOMATIC Transmission :: 99-05

This is a stock size replacement that is higher quality than the stock unit but should not be confused with our KOYO all aluminum performance 37mm and 55mm units. Still has plastic tank sides like the stock unit. Picture is NOT of this unit.

Customers who bought KOYO Miata Radiator OEM Replacement (PLASTIC end tank)--AUTOMATIC Transmission :: 99-05 also often bought:
	Hawk HP Plus Miata Brake Pad Set -Front::94-00 Hawk Miata Brake Pads are manufactured using the highest quality materials available for Street-performance driving. For the serious Street/Autocross performance driver, this is a great pad. Brian's Miata Application Notes: There is NO free lunch on... More Info
	NEW Team Dynamics Silver Pro Race 1.3 15x7 25mm SPEC MIATA SUPER SPECIAL! New for SPEC MIATA, this is the NEW version you won't find at most dealers yet...the PRO 1.3 is here. Stronger than any competitor in this price range! Made HUBCENTRIC for the Miata with 54mm center bore! Center caps NOT included with this new Pro 1.3 but... More Info
	HAWK HPS FRONT Pad Upgrade::06+ Step up from your standard factory Miata brake pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These Miata brake pads are great choice for 06 and newer MX5 Miatas. More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton