Miata 1990-2005: Suspension : Sway Bars

Racing Beat Sway Bar Brace Kit - Front BRACE ONLY

For those with the blocks and bolts already....who want to now add the brace.

Customers who bought Racing Beat Sway Bar Brace Kit - Front BRACE ONLY also often bought:
	2004-2005 MAZDASPEED Miata Air Splitter::04-05 Miata splitters are designed to protect the front edge of your Miata bumper and air dam from curb edges, parking blocks, intersection dips, etc. Extends extends 1.75" at the outer edges of your lower Miata bumper and 1" below the Miata radiator opening.... More Info
	Racing Beat Rear Chassis Brace The Racing Beat-design Rear Lower Control Arm Brace is intended for 1990 through 1991 1/2 Miata chassis. This brace will also fit the 1999-05 Miata chassis with no modifications required. While it can be installed on other Miata chassis, substantial... More Info
	Racing Beat Front Miata Sway Bar - Tubular RACE BAR::90-97 Thicker wall race bar for 90-97. Specifications This bar is 1.125 OD (3/16 wall) normally used in the 99-00 application but bent to the 90-97 fitment and is supplied with a heavy-duty clamp, replacement urethane bushings, Prothane bushing grease,... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton