Miata 1990-2005: Suspension : Springs

Racing Beat "Street" Miata Springs :: 99-00

Racing Beat has designed Miata suspension coil springs that are suitable for a variety of street, autocross, and Solo applications. These Miata "street" springs interchange exactly with the stock springs on the 1999-05 Miata and can be used with stock or aftermarket shocks. These Miata springs have been designed with a rate increase of 28% and a modest drop of 1-inch. These springs have a spring rate of 207 lbs./inch.

Price is for a FULL set of FOUR Miata Springs.

Customers who bought Racing Beat "Street" Miata Springs :: 99-00 also often bought:
	KONI Adjustable Sport Miata Shock--REAR--SALE::99-05 Miata shocks come in many flavors but these are our favorite Miata shocks. The most popular Miata shock for the last decade with Miata street users, autocrossers, and Miata track drivers alike. These Koni Miata shocks always seem to work just a little... More Info
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info
	KONI Adjustable SPort Miata Shock--FRONT--SALE!::99-05 Miata shocks come in many flavors but these are our favorite Miata shocks. The most popular Miata shock for the last decade with Miata street users, autocrossers, and Miata track drivers alike. These Koni Miata shocks always seem to work just a little... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton