Miata 1990-2005: Suspension : Coilovers

Ground Control 400 pound Spring! :: 90-05

Okay, you bought our Miata Ground Control kit with lower rates and are ready to go big now! Here you go, price is PER SPRING, so be sure to order two if you want two! Eibach 2.5 I.D/400 springs, 6 inch length.

Customers who bought Ground Control 400 pound Spring! :: 90-05 also often bought:
	Ground Control 700 pound Spring!::90-05 Okay, you bought our Miata Ground Control kit with lower rates and are ready to go big now! Here you go, price is PER SPRING, so be sure to order two if you want two! Eibach 6"/2.5 I.D/700 springs More Info
	McGard Spline Drive Tool This is the tool for McGard Spline Drive lugs. More Info
	NEW...COMPLETE Cat-Back RoadsterSport 3 Miata Polished Stainless Steel Exhaust for 90-97 It is BACK! By popular demand we once again have a RoadsterSport exhaust for 90-97 Miatas! Includes the connecting pipe! We took the RoadsterSport 3 features of our 99-05 design and applied them to a complete redesign of our exhaust for 90-97... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton