Miata 1990-2005: Suspension : Braces

Freedom Design Front Miata Shock Tower Brace

Sorry, OUT OF STOCK. ETA is JUNE!

Our original shock tower brace and still one of the better choices. Fits all years. Does not with superchargers! Does not fit with Racing Beat Highflow on 90-93 Miatas. Can be made to fit with Racing Beat Highflow on 94-97 Miatas but it takes some fabrication skills. Does fit snugly with the RB highflow intakes on 99-05 Miatas.

Customers who bought Freedom Design Front Miata Shock Tower Brace also often bought:
	Racing Beat Front Control Arm Brace::90-05 Unlike the many "steel pipe crimped at both ends" braces available on the market, the Racing Beat Front Lower Control Arm Brace is a thick, cast aluminum brace that is both lightweight and rugged. As quoted by Miata Magazine, "The Racing Beat subframe... More Info
	Rear Alutec Shock Tower Brace The perfect complement to our front strut tower braces. A rear strut tower brace ties the upper chassis together to reduce flexing and allow the suspension to work as designed. CNC machined from billet aluminum, this brace is not only strong but light... More Info
	Hubcentric Ring set to Fit Miata 73/54 Most modern aftermarket rims are made with an oversize center bore and the centering ring brings that bore size down to the Miata hub fitment of 54.1 mm. If you have a Miata, these help properly fit your new alloys. Price is for set of FOUR rings. More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton