Miata 1990-2005: Wheels and Tires : Wheels

Team Dynamics Pro Race 15x7 1.2 30mm High Power WHITE

New version of the Team Dynamics Pro Race 1 with the spokes just a little more withdrawn from the face for the spec guys actually rubbing their neighbors! Now in stock in 30mm. No need for hubcentric rings because these are milled 54mm hubcentric for the Miata. Center caps not included with any Team Dynamic wheel but available separate. A little over 13 pounds for Spec Miata.

Customers who bought Team Dynamics Pro Race 15x7 1.2 30mm High Power WHITE also often bought:
	Team Dynamics Center Caps Caps sold individually. Note Team Dynamics now uses the same cap for Pro Race 1, 1.2, 1.3 and Pro 2. Cap has changed often, picture shows current cap and we do not have the prior designs. Remember to take center caps off for track events...they are... More Info
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info
	Team Dynamics 15x7 Pro Race 1.2 30mm White New version of the Team Dynamics Pro Race 1...with the spokes just a little more withdrawn from the face for the spec guys actually rubbing their neighbors! Now in stock in 30mm. Takes a standard 73/54 hubcentric ring. 13+ pounds each. More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton