Miata 1990-2005: Wheels and Tires : Wheels

Miata OLD Pro Race 1, Silver 30mm 15x7----CLEARANCE

Standard 73mm bore to accept hubcentric rings (sold separately on this website). Center caps not included with any Team Dynamic wheel but available separate. These are standard Miata 4x100 bolt pattern and fit all 1990 through 2005 Miatas (even those with factory big brakes or our big brake kits).

The old Pro Race One is OUT OF PRODUCTION, we are just selling off what remains, get a spare while you can!

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton