Miata 1990-2005: Wheels and Tires : Wheels

Spec Miata Wheel Special Team Dynamics Pro Race 15x7 1.2 15mm Anthracite--

Miata race offset of 15mm! Requires MASSIVE fender rolling.

Customers who bought Spec Miata Wheel Special Team Dynamics Pro Race 15x7 1.2 15mm Anthracite-- also often bought:
	Quality Rubber Shift Boot - Large--::90-05 Torn rubber shift boots allow fumes and extra noise into the interior. If you have noticed a change for the worse in your Miata it is time to change one or both of the factory boots. The smaller, lower boot, sits on top of the transmission at the... More Info
	F1 Racing Stage 3 Ceramic Sprung Miata Clutch Kit::89-93 The F1 Racing Stage 3 Miata clutch kit utilizes a performance pressure plate paired with a 6-puck ceramic sprung-hub disc. This is an excellent solution for a high horsepower Miata looking for a quick clutch engagement (about 25% stiffer pedal than... More Info
	Performance Miata Brake System -- SALE!::90-93 Put this FOUR corner slotted Miata brake rotor system to work for you. Slotted Miata brake rotors provide maximum stopping power in all conditions by allowing harmful heat and gases to escape. The slots are particularly useful for Miata braking in wet... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton