Miata 1990-2005: Wheels and Tires

ENKEI SPECIAL #5...Four ENKEI RP-F1 15x7-35mm with FOUR TOYO 205/50/15 T1Rs...save $80 now!


ENKEI SPECIAL #5...Four ENKEI RP-F1 15x7-35mm with FOUR TOYO 205/50/15 T1Rs...save $80 now!
Part Number: 21-1050FS2
Price: $1,249.00
Quantity:

These are a personal favorite for their combination of great quality, great finish, strength, lightness and price. Just 9.8 pounds each in 15x7 and for a bargain price. Although the Kosei K1-TS look similar in the pictures here don't be fooled, this wheel is much nicer in person and has proven much stronger. Rolling Rim technology means forged like strength. Note that Enkei does not make a center cap for this size but our KONIG HELIUM center caps will fit this wheel if you must have center caps (remove rear spring from Helium cap, insert main disc from the cap, and spray paint the small quarter-size "Konig" label before installing). We strongly recommend you do NOT use your factory lugs, a narrow lug will fit better and not scratch your new wheels. All our lugs are extended length for more contact with the studs and narrow to better avoid scratching (see our McGard Spline Drive Lugs in particular). Does not fit aftermarket or other BIG brake kit. ENKEI SPECIAL includes FOUR of these beauties precisely mounted and balanced on our Hunter Mount and Balance System with FOUR 205/50/15 TOYO T1R Tires and including Miata size hubcentric ring set (73/54)! This website will let you build any combination of wheels and tires you like. Also fits many Hondas and Toyotas with the same 4x100 bolt pattern.


Customers who bought ENKEI SPECIAL #5...Four ENKEI RP-F1 15x7-35mm with FOUR TOYO 205/50/15 T1Rs...save $80 now! also often bought:

McGard Spline Drive Lugs and Tool Set McGard Spline Drive Lugs and Tool Set
These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and ordering... More Info
Helium Center Caps-- Helium Center Caps--
Snap on caps for Heliums, also fits Konig Minuz....and can be adapted to Enkei RP-F1 15 inch size only. Only in silver (they don't make a bronze cap). Note the picture is old, the current cap is ROUND. Price is per cap. More Info
Miata Seatbelt Tower Brace Miata Seatbelt Tower Brace
94-97 Miata owners were given a factory seat belt tower brace that was inadequate for the job not to mention early Miata owners that were left out altogether. This billet aluminum brace for 90-03 Miata owners mounts to factory holes and offers more... More Info
Sign Up for our Newsletter
Mazda Talk Forums

Installation Instructions

Re: NC Header Installation

Another set of very complete installation instructions by a customer at Miata.net forum:http://forum.miata.net/vb/showthread.ph ... ost4703239
Posted by Brian

Re: AEM Install for NB

With Brian's help, I was able to get the nut off using some liquid wrench. Applied and let it sit for 4-6 hours, and used a vice grip wrench. Still took some...
Posted by Gecko

AEM with MonsterFlow coolbox Install for NB

Anyone else install the AEM short ram intake had trouble loosening the power steering pump nut? I am still not able to get it off and even took it to a shop ...
Posted by Gecko

Re: NC Goodwin trunk spoiler install

One other question:Is the spoiler made with polyester resin or epoxy resin? Apparently, that makes a difference when painting.Thanks
Posted by slartibartfast

Re: NC Header Installation

Brian,Great. Thanks for the info. As you may have guessed, I'm trying to plan out my next mods. It's tough, since I only have short periods of time to work ...
Posted by skeeler

Mazda Talk Forum
Home About Us Customer Care Technical FAQs Mazda Talk Forums Contact Us

Your Cart | Checkout

Click Model Year
Miata 1990-2005
MX5 2006-2010
RX8 2004-2010
Mazda6 2003-2010
RX7 1979-1995
Mazda3 2005-2010
Need Shipping Quote?
Home About Us Customer Care Technical FAQs Mazda Talk Forums Contact Us
Good-Win Racing Mazda Performance Parts