RX7 1979-1995: Wheels and Tires

McGard Spline Drive Lugs and Tool Set

Part Number: 21-1058FD

Price: $82.00

Quantity:

These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent loosening up under load), and a wheel lock.

An RX7 takes 20 of these and ordering one of these kits includes 20 spline lugs and one tool. If you look really close at the picture above you can actually see the two piece nature of this lug by looking into the lug at the bottom of the picture.

The part that touches the wheel (the "seat") stops turning and a bearing between that little ring and the rest of the lug allows the outer part of the lug to keep turning.

What this means for you is that the lugs are not grinding against the surface of your nice new wheels and these lugs go on much smoother than any other lug choice. If you ask what is on our Mazdas here...this is the choice.

Customers who bought McGard Spline Drive Lugs and Tool Set also often bought:
	Enkei RP-F1 18x9.5, 45mm offset 5x114 Lighter and less expensive than SSRs in this size at only 17.2 pounds for 9.5 inches wide and this special order from Enkei in the 45mm offset FITS all four corners of your RX7. We are the only vendor in the U.S. with this size IN STOCK. Don't be... More Info
	Enkei Center Caps for RP-F1 These center caps are for 16 and 17 inch and 18 inch Enkei RP-F1 only! They do not make a center cap for the 15 inch size and these caps will NOT fit the 15 inch size. It is unfortunate that Enkei has gone to these very expensive fancy metal caps, we... More Info
	Hubcentric ring 73/67 Most modern aftermarket rims are made with an oversize center bore and the centering ring brings that bore size down to the RX7 hub fitment of 67.1mm. These are the rings for the Enkei wheels you see on this page for fitment of RX7 rims. Folks ask me... More Info