IT S BACK! We now have this Miata style bar back in stock! Styling Change: This redesigned Miata style bar does not feature the lower cross-bar that was present on earlier models. This component was deleted from the current bar to allow compatibility with the factory wind blocker, Racing Beat 3-Piece Deck Cover, aftermarket replacement tops with glass windows, etc... Appearance The Type V Miata Style Bar is a departure from other Miata style bars with its wide, aerodynamic design. This Miata style bar measures 4-inches across, which further adds to its sleek and dynamic aero-design. Hand-tailored padding and upholstery-grade vinyl lend a level of elegance that complements any Miata. The graceful lines of the Type V Miata style bar give hints of its European design elements. Fitting Notes The Type V Miata Style Bar may not be an exact color match with your factory interior. We have tried to match the factory color as close as possible with the fabric color choices made available to us. All of the Racing Beat miata style bars are designed to operate with both the stock factory soft and hard tops in place. This miata style bar will operate with the factory Wind Blocker in place. (Note: This bar will function with the aftermarket Oris windblocker unit in place.) Additionally, on the 1990-2000 Miata, rearward seat travel is not impeded, but the headrest will rest inside the upper bar. With the 2001 model year, Mazda introduced taller seats that will rest against the upper bar, not inside as with earlier models. This restricts the rearward movement of the seat back by two clicks . Rearward vision is reduced with the use of this bar. Manufactured entirely in the USA, each Miata Style Bar is supplied with detailed, illustrated instructions and can be installed in approximately 2 hours using basic tools. The addition of this, or any Miata Style Bar, will add chassis stiffening to the mid-section of any Miata. This Miata Style Bar does not provide rollover protection and is not intended to be used as a safety device.
|
|
