Miata 1990-2005: Roll Bars : Autopower

Rollbar SFI rated molded pad

Specifically designed by the folks at Hard Dog to fit their Roll Bars...but it also fits our Autopower Rollbars. Cover is made from Custom molded SFI approved high density material. Installs with automotive grade velcro for easy removal and installation. Picture is for illustration purposes and SFI pad SHOULD BE COVERED because UV light exposure will harden the pad and discolor it and reduce the effectiveness.

Customers who bought Rollbar SFI rated molded pad also often bought:
	Autopower Rollbar::90-05 Selecting a Miata roll bar means consideration of numerous factors including ease of use and ease of installation. This is the bar we run in our own 99 Miata track car. It is a basic and effective Miata roll bar. It is the cleanest and fastest... More Info
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info
	Hubcentric Ring set to Fit Miata 73/54 Most modern aftermarket rims are made with an oversize center bore and the centering ring brings that bore size down to the Miata hub fitment of 54.1 mm. If you have a Miata, these help properly fit your new alloys. Price is for set of FOUR rings. More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton