Miata 1990-2005: Roll Bars : Hard Dog

Hard Dog Harness Bar

Add a horizontal harness bar at shoulder level behind the seats to your harddog Hard Bar Sport order to make mounting a six point harness easier. This is addition of a welded in bar and can be added ONLY at the time the roll bar is ordered!! Note that not all bars can have a harness bar added (ask if you have questions). Adding this option to an M2 sport gets you harness tabs, not a harness bar.

Customers who bought Hard Dog Harness Bar also often bought:
	Hard Dog M2 Sport Black Powdercoat W/ DOUBLE Diagonal::90-05 The M2 Sport Bar uses the same main hoop mounting system as the original Hard Bar Sport. The redesigned rear braces allow room for the '99 + M2 Mazda glass rear window. The M2 Sport will also fit the '90-'97 M1. The non diagonal version is compatible... More Info
	Autopower Six Point Harness The Pro-Cam restraint system uses an easy to operate 1/4 turn release buckle. The lap belts, shoulder harness and crotch strap snap in quickly and easily. The light weight cam lock buckle is CNC machined from billet aluminum, and alloy steel. 3" wide... More Info
	Hard Bar Sport, Single Diagonal - Black Miata Roll Bar::90-05 The Hard Bar Sport Miata Roll Bar uses the same main hoop as the Hard Dog Miata Hard Bar but with the addition of larger bolt-in main hoop mounting plates and rear braces that mount to the structural framework inside the Miata rear wheel wells. One or... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton