Miata 1990-2005: Roll Bars : Autopower

Miata Roll Bar Camera Mount

The video camera mount is designed to clamp on a roll bar or cage. A neoprene bushing helps eliminate vibration for a clear picture. Special adjustment features allow you to aim the camera straight ahead with mount clamped at any angle. SCCA approved.

Customers who bought Miata Roll Bar Camera Mount also often bought:
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info
	Porterfield R4-RACE Miata Brake Pads Rear::94-02 Hardcore Miata Brake Pads for RACE use - for the spec miata and other Miata track users looking to try something other than the hawks. While the hawk blues tear up your rotors these miata brake pads give you the coefficient of friction and temp range... More Info
	ENKEI RP-F1 15x7-Silver 35mm offset Nothing beats this Enkei RPF1 for quality, light weight and price. Fits Miata, and many Hondas and Toyotas that share the 4x100 bolt pattern. These are a personal favorite on the Miata for their combination of great quality, great finish, strength,... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton