Boss Frog Clearview Miata Rollbar Black--STANDARD---SALE!!

Boss Frog makes the ClearView double diagonal Single Hoop Miata roll bar, with spaced diagonals for an unobstructed view through the rearview mirror. Made of the highest quality 1-3/4" x 1/8" wall DOM tubing, with heavy 7 gauge laser cut flat parts. The ClearView is available in three finishes; Black powdercoat - after manufacturing, the rollbars are shot-blasted to remove any mill scale from the steel, then they go through a 7-step cleaning process, then a 60% gloss powder is electrostatically applied and baked at over 400 degrees to get a hard durable finish. Polished Stainless - high quality 304 stainless tubing and flat parts are hand polished to a shiny finish. Unfinished - the color and finish of the rollbar is completely up to you. One key to the Boss Frog Clearview's strength is the rear brace foot. The foot is a formed triangle, which provides lateral support to the vertical hoop brace. Other manufacturers weld a flat plate on the brace tube, which gives no structural support at all to the brace. In rollover testing per SCCA guidelines, this rear brace foot helped support the vertical brace tube, passing the testing with almost no deflection. The installation instructions are also available on request. One question commonly asked is "How do I attach a harness"? Boss Frog believes that the best way to attach a harness is to wrap it directly around the rollbar. For this reason, they do not offer harness "tabs", which are often built too light to work when you really need them. The Boss Frog rear vertical brace is within the SCCA rule of being 20 degrees from the centerline of the seat. This means that harness straps can be wrapped directly around the vertical brace, just below the diagonal brace. NOTE: Although our store will charge you shipping all these ship factory direct with $65 flat rate shipping, we will adjust all shipping charges to the flat rate of $65.