Good-Win Racing Mazda Performance Parts

Boss Frog Clearview Miata Rollbar UNFINISHED MAXX
NOT AVAILABLE

1990-2005

Discontinued

Miata 1990-2005 · Roll-Bars · Boss Frog


Part Number: 30-1037MAXX

Application: 1990-2005

No Longer Available
From Good-Win-Racing

Boss Frog Clearview Miata Rollbar UNFINISHED MAXX
rating (0 Ratings)
rating (0 Ratings)

Thank you. You have rated this product.

Miata Roll Bar "Clearview" by Boss Frog. This Miata Roll Bar is a Double Diagonal Single Hoop Miata roll bar, with spaced diagonals for an unobstructed view through the rear view mirror. Made of the highest quality 1-3/4" x 1/8" wall DOM tubing, with heavy 7 gauge laser cut flat parts.

The ClearView is available in three finishes;

Black powdercoat - after manufacturing, the rollbars are shot-blasted to remove any mill scale from the steel, then they go through a 7-step cleaning process, then a 60% gloss powder is electrostatically applied and baked at over 400 degrees to get a hard durable finish.

Polished Stainless - high quality 304 stainless tubing and flat parts are hand polished to a shiny finish.

Unfinished - the color and finish of the rollbar is completely up to you.

One key to the Boss Frog Clearview's strength is the rear brace foot. The foot is a formed triangle, which provides lateral support to the vertical hoop brace. Other manufacturers weld a flat plate on the brace tube, which gives no structural support at all to the brace. In rollover testing per SCCA guidelines, this rear brace foot helped support the vertical brace tube, passing the testing with almost no deflection. The installation instructions are also available on request.

One question commonly asked is "How do I attach a harness"? One way is to attach a harness is to wrap it directly around the rollbar. The Boss Frog rear vertical brace is within the SCCA rule of being 20 degrees from the centerline of the seat. This means that harness straps can be wrapped directly around the vertical brace, just below the diagonal brace. And the best choice is the BossFrog Bolt In Harness Bar

NOTE: Although our store will charge you shipping all these ship factory direct with $70 flat rate shipping to USA lower 48 states, we will adjust all shipping charges to the flat rate of $70. MAXX version leans back a few inches as compared with the standard

*** Product images may differ from actual product appearance ***

REVIEWS

Brian, Thank you!!! We last spoke in November about some upgrades for my 2011 MX5 soft top. It has finally warmed up in NE Ohio and two relaxed weekends of wrenching on my car were well worth the effort. Installation of the RoadsterSport ceramic coated street header was straight forward and took under 8 hours, including a 40 minute test drive and cleanup of the garage! Combined with the RoadsterSport Q exhaust, the sound is fantastic and the increased torque, horsepower and performance make it a blast to drive. The addition of the Cobalt shock tower brace, Racing Beat sway bars, ILM front power train and X braces really enhanced the ride - minimal body roll, comfortable and very responsive. Your recommendations really helped transform the car from great to fantastic. Your research, product development and candid recommendations make you a standout in the industry. My only questions are - what's next on my list .... And how soon will my wife want the same upgrades on her 2012 PRHT ... Again, thank you!!! Charles G

-- Charles

Wanted to say thanks. The exhaust system fit perfectly, no drone at steady throttle, but a nice sound winding thru the gears. And it does sound a lot like my old Alfa. The Racing Beat lowering springs are just right. Appreciate the tech advice and the service.

-- Todd