Miata 1990-2005: Roll Bars : Autopower

Autopower Five Point Harness

The Pro-Cam restraint system uses an easy to operate 1/4 turn release buckle. The lap belts, shoulder harness and crotch strap snap in quickly and easily. The light weight cam lock buckle is CNC machined from billet aluminum, and alloy steel. 3" wide belts for shoulders and lap, 2 inch for sub belts.

Customers who bought Autopower Five Point Harness also often bought:
	Miata Header Heatshield Blanket--New UPDATED VERSION NEW version shown on the RIGHT. This updated Miata Header Heat Shield has been improved with an additional layer of fiberglass mat and increased in size by about 20% so it works better with the Racing Beat header and the NC cars. It also works well on... More Info
	Koni Adjustable Sport Miata Shock--8041-1204 SPORT REAR--SPECIAL!::90-97 Miata shocks come in many flavors but these are our favorite Miata shocks. The most popular Miata shock for the last decade with Miata street users, autocrossers and track drivers alike. These Koni Miata shocks always seem to work just a little better... More Info
	Tow Hook::90-97 If you ever go to the track or are building a Spec Miata for racing, these are required. This is what the officials need to hook the tow line to in order to be able to rescue a disabled car. Constructed of sturdy .1875 inch thick steel - Silver... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton