MX5 2006-2010: Roll Bars

Black Finish Upgraded Bar :: 06-10


Black Finish Upgraded Bar
Part Number: 30-10412
Application: 06-10
Price: $685.00
Quantity:

Built by our friends at AWR Racing (same company that makes the full cages for Mazda's Spec racing series with this same car!). When Mazda's own choice for building the full race Miata roll cage for the Miata builds a bolt in Miata bar, you can expect a great fit...and that's what we got when we installed this bar in our own 2006 MX5 Miata. Factory plastic simply snaps off and was out of the car in ten minutes, we had the factory bar out in another ten minutes, the new bar bolted in place in another 15 minutes, and were down to trimming and reinstalling factory plastic bits. Total install time about two hours with cleanup. Under the factory roll hoops is a wimpy factory bar that is remarkable only because it attaches in 6 different points, including all the way through to the pan. This replacement uses much more stout 1.5in OD x .120 thickness tubing and a boxed steel cross section running between the seat belt towers to add a great deal of strength and superior protection, but still mounts to all the factory mounting points with all factory hardware for an easy installation! Made in silver finish or black powder coat as shown and includes a black fiberglass cap to make installation look almost factory (see full install instructions and pictures posted in our forum instruction section). This is a direct bolt in roll bar with no drilling needed to install. This bar also comes with a black fiberglass cap for covering up the exposed trim left behind from original bar covers (look close in the picture). Bar is available in Black or Silver. Price includes shipping in the lower 48 states (we will cancel any ship charge our store adds for these orders). Call us about optional petty bar special order. YES, still full function of the soft top and you can still use the optional factory hardtop. But, does not fit with Power factory folding hardtop. The standard bar is approved for all NASA HPDE's. The petty bar design is approved for NASA Time Trials and meets the requirements for SCCA Track trials.


Customers who bought Black Finish Upgraded Bar :: 06-10 also often bought:

Racing Beat MX5 Miata Radiator Protective Screen Racing Beat MX5 Miata Radiator Protective Screen
MX-5 Radiator Screen (2006 and later). Originally developed for use on the RX-8, Racing Beat has adapted the Racing Beat radiator protective screen for use on the 2006 and later Mazda MX-5. Although Mazda positioned the radiator in a strategic position... More Info
Autopower Six Point Harness Autopower Six Point Harness
The Pro-Cam restraint system uses an easy to operate 1/4 turn release buckle. The lap belts, shoulder harness and crotch strap snap in to the quick release quickly and easily. The light weight cam lock buckle is CNC machined from billet aluminum, and... More Info
One Glass Packed Baffle Insert for RoadsterSport DUALS and RoadsterSport Q.::06+ One Glass Packed Baffle Insert for RoadsterSport DUALS and RoadsterSport Q.::06+
Glass Packed baffle insert for RoadsterSport Duals and RoadsterSport Q...ONLY. Does not fit RoadsterSport RACE or other mufflers! RoadsterSport MX5 Miata mufflers ship with removable baffles but for those that want to tame the sound even more we offer... More Info
Sign Up for our Newsletter
Mazda Talk Forums

Installation Instructions

Re: NC Header Installation

Another set of very complete installation instructions by a customer at Miata.net forum:http://forum.miata.net/vb/showthread.ph ... ost4703239
Posted by Brian

Re: AEM Install for NB

With Brian's help, I was able to get the nut off using some liquid wrench. Applied and let it sit for 4-6 hours, and used a vice grip wrench. Still took some...
Posted by Gecko

AEM with MonsterFlow coolbox Install for NB

Anyone else install the AEM short ram intake had trouble loosening the power steering pump nut? I am still not able to get it off and even took it to a shop ...
Posted by Gecko

Re: NC Goodwin trunk spoiler install

One other question:Is the spoiler made with polyester resin or epoxy resin? Apparently, that makes a difference when painting.Thanks
Posted by slartibartfast

Re: NC Header Installation

Brian,Great. Thanks for the info. As you may have guessed, I'm trying to plan out my next mods. It's tough, since I only have short periods of time to work ...
Posted by skeeler

Mazda Talk Forum
Testimonial'/

First I want to again thank you for working with me on this muffler. I have almost 100 miles on it now, and it has a nice mellow sound. a little Bass, but not too much. A little louder than stock, but not too loud. Plus it is nice inside the car with the top up. I am happy so far I bought this one.

I belong to a local Miata club, and am very active with it. When Spring comes I will tell everyone how much I like the muffler, and how great you are to work with. Maybe I can get some extra business for you.
-- Bill

Testimonial
Home About Us Customer Care Technical FAQs Mazda Talk Forums Contact Us

Your Cart | Checkout

Click Model Year
Miata 1990-2005
MX5 2006-2010
RX8 2004-2010
Mazda6 2003-2010
RX7 1979-1995
Mazda3 2005-2010
Need Shipping Quote?
Home About Us Customer Care Technical FAQs Mazda Talk Forums Contact Us
Good-Win Racing Mazda Performance Parts