Miata 1990-2005: Exterior : Rack and Hitches

Removeable Luggage Rack - Modern Look :: 90-05

We carry two styles of luggage rack. This one gives a more modern look. Both are made out of stainless steel and are simple to install and remove.

Customers who bought Removeable Luggage Rack - Modern Look :: 90-05 also often bought:
	Auto Dry Blade Squeegy::All This handy 11.5" water wand swipes away surface water in minutes. The soft silicone T-bar contours to your vehicle's shape and glides over any painted surface without scratching the finish. It produces 15-percent less friction than a terrycloth towel,... More Info
	Mud Guard Set, Front, Black::99-04 Stylish, yet functional, these mud guards fit great and install easily. These items can also be painted to match the car. Note this stock photo shows a 1990 Miata and the 99-04 version of the guard is much smaller. More Info
	Axxis/PBR ULT Ultimates Miata Brake Pads::94-00 FRONT PBR ULT Miata Brake Pads, formerly known as Axxis Ultimates, quickly developed a loyal following in the Miata community because they have one of the highest coefficients of friction of any brake pad available for street use on the market. Anything... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton