Miata 1990-2005: Exterior

Miata Rear Finish Panel :: 90-97

YES, IN STOCK!

This is the panel AROUND the license plate BETWEEN the rear lights!!! Made to fit the 90-97 miata, you need one of these to replace your poor, cracked, and brittle finish panel. The panel comes bare, ready to paint and put on your car, with all the necessary bolts and clips included for easy installation. FIBERGLASS version

Customers who bought Miata Rear Finish Panel :: 90-97 also often bought:
	ENKEI SPECIAL #5...Four ENKEI RP-F1 15x7-35mm with FOUR Nitto NeoGen 205/50/15 tires...save! These are a personal favorite for their combination of great quality, great finish, strength, lightness and price. Just 9.8 pounds each in 15x7 and for a bargain price. Although the Kosei K1-TS look similar in the pictures here don't be fooled, this... More Info
	Performance Miata Brake System -- SALE!::90-93 Put this FOUR corner slotted Miata brake rotor system to work for you. Slotted Miata brake rotors provide maximum stopping power in all conditions by allowing harmful heat and gases to escape. The slots are particularly useful for Miata braking in wet... More Info
	Robbins Streamline Vinyl Zipperless Plastic Window Top - Black Note: With Rain Rail::90-97 Streamline tops are made to the exact pattern of the New 2006 MX-5. This design eliminates the deck seams (front to back seams above the doors) and the rear window panel standard on 90-05 Miatas. This makes for an outstanding looking top that is sleek and... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton