Miata 1990-2005: Exterior : Accessories

Turn Signal Lens Covers - Smoked :: 90-97

Colored lens covers give your Miata a clean, fresh appearance. In addition to adding a great look, all pieces are cut from 16.5 mil, heavy duty film, to help withstand impacts. Film is designed so as not to affect the clarity of brake lights, fog lights, or turn signals. May not be legal in all states.

Customers who bought Turn Signal Lens Covers - Smoked :: 90-97 also often bought:
	Taillight Lens Covers -- Smoked::90-97 Colored lens covers give your Miata a clean, fresh appearance. In addition to adding a great look, all pieces are cut from 16.5 mil, heavy duty film, to help withstand impacts. Film is designed so as not to affect the clarity of brake lights, fog... More Info
	Racing Beat Rear Miata Sway Bar - Solid ALL years Our favorite Miata sway bar....Racing Beat-designed Miata sway bars reduce chassis roll in turns and increase your Miata's sensitivity to steering inputs, thereby improving maximum cornering power. Substantial engineering effort, select steel... More Info
	Racing Beat HighFlow Miata Intake::94-97 For any Miata this Racing Beat Miata Intake Kit uses a cast aluminum tube and a large KandN filter to provide better than stock performance. Aggressive sound, easy installation, no permanent changes. NOW INCLUDES CRUISE CONTROL RELOCATION KIT!!! ... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton