Miata 1990-2005: Exterior : Accessories

Hood Lift Kit (for miata WITHOUT cruise control)

No more fumbling with a prop rod. Our hydraulic lift gently raises your hood - hands free. No drilling or riveting on your hood required. Complete kit ready to install with detailed instructions. Fits all 90-97. Also fits 99 to 05 Miatas that do NOT have the factory cruise control.

Customers who bought Hood Lift Kit (for miata WITHOUT cruise control) also often bought:
	Upper - Red::90-93 Silicone hoses improve reliability over standard hoses since they do not crack or become brittle. With a maximum working pressure rating of 73.5psi and to 450 degrees F temperature range, they remain flexible in the toughest of conditions. Hoses are... More Info
	6UL 15x8 pcd 4x100 BLACK +36-- From our friends at 949 Racing comes this lightweight 12.6 lb race wheel, one piece cast construction. Yes, clears all factory Miata brakes and our BIG BRAKES. Double valve design. JWL approved. *Fits 205/50/ 225/45, 225/50,... More Info
	Miata Header Heatshield Blanket--New UPDATED VERSION NEW version shown on the RIGHT. This updated Miata Header Heat Shield has been improved with an additional layer of fiberglass mat and increased in size by about 20% so it works better with the Racing Beat header and the NC cars. It also works well on... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton