Miata 1990-2005: Exterior : Accents and Trim

Polished Side Marker Rings - Set of 4 :: 90-04

Polished accents add a touch of class and European flare to your Miata. Ours are precision cut from polished stainless steel for a perfect fit. The side marker surrounds included stainless steel screws for a finishing touch.

Customers who bought Polished Side Marker Rings - Set of 4 :: 90-04 also often bought:
	Rosewood Dash andamp; Door Kit Whether you choose wood or carbon fiber, these dash kits add style to your cockpit. High quality adhesive and UV protection ensure that these kits are a durable addition to your Miata. Door kits included wood pieces for door panels. More Info
	Horizontal Slat Grille - Silver::90-97 Give your Miata a more aggressive look with our slat grille. Slats are CNC machined from mild steel for a perfect it, our grille is then powder coated for a long lasting finish. Specifically designed to be strong yet allow maximum airflow to your... More Info
	HEADER INSTALLATION Short extension cord for prime/trim O2 Sensor...for use ONLY when installing RoadsterSport header. This is a recommended option for the RoadsterSport header. This is an extension cord for the FIRST O2 sensor which does provide fuel trim data to the factory ECU. With both O2 sensors out your NC will run the safe default map which is overly rich. ... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton