Miata 1990-2005: Exterior : Accents and Trim

Polished 3rd Brake Light Ring :: 99-05

SORRY, SOLD OUT...

Polished accents add a touch of class and European flare to your Miata. Ours are precision cut from polished stainless steel for a perfect fit. 3rd brake light surrounds are supplied with 3M adhesive.

Customers who bought Polished 3rd Brake Light Ring :: 99-05 also often bought:
	HEADER INSTALLATION Short extension cord for prime/trim O2 Sensor...for use ONLY when installing RoadsterSport header. This is a recommended option for the RoadsterSport header. This is an extension cord for the FIRST O2 sensor which does provide fuel trim data to the factory ECU. With both O2 sensors out your NC will run the safe default map which is overly rich. ... More Info
	NC Oil Cooler Kit for MX5 Miata::06-08 Our MX5 Oil Cooler Kit is recommended for any track use. Includes hoses needed for hookup. This is a sandwich style cooler that circulates engine coolant through the adapter to cool your oil at the oil filter location. This Miata MX5 Oil Cooler Kit... More Info
	RoadsterSport Stainless MX5 Miata Midpipe::06-12 Designed as a bolt-on replacement for the factory midpipe to carry the 2.5 inch outlet of the factory header, and our RoadsterSport and Racing Beat headers, all the way to your choice of any of our 2.5 inch inlet RoadsterSport mufflers. Also bolts up to... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton