Miata 1990-2005: Interior : Steering Wheels

Leather Steering Wheel Cover - Black - Standard 4 Spoke :: 99-04

If the look and feel of fine leather is your thing, our leather steering wheel cover is sensational. Easy installation.

This is for a Standard 4 spoke wheel.

Customers who bought Leather Steering Wheel Cover - Black - Standard 4 Spoke :: 99-04 also often bought:
	Lower - Blue::99-05 Silicone hoses improve reliability over standard hoses since they do not crack or become brittle. With a maximum working pressure rating of 73.5psi and to 450 degrees F temperature range, they remain flexible in the toughest of conditions. Hoses are... More Info
	Quality Rubber Shift Boot - Small::90-05 Torn rubber shift boots allow fumes and extra noise into the interior. If you have noticed a change for the worse in your Miata it is time to change one or both of the factory boots. The smaller, lower boot, sits on top of the transmission at the... More Info
	Quality Rubber Shift Boot - Large--::90-05 Torn rubber shift boots allow fumes and extra noise into the interior. If you have noticed a change for the worse in your Miata it is time to change one or both of the factory boots. The smaller, lower boot, sits on top of the transmission at the... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton