RX8 2004-2011: Interior

Voodoo Knob Magnum Black Textured Finish :: All

Shifting pleasure....good fit. Note that we only sell the "magnum" version of the round which is not as big as it sounds and has the right weight to work just right.

Customers who bought Voodoo Knob Magnum Black Textured Finish :: All also often bought:
	Console Knee Pad This custom-molded pad is designed to be installed on the driver side (left) of the console. Made from black urethane foam that is both durable and easy-to-clean, but looks great and retains a factory look. A full 11/2" at it s thickest point, your... More Info
	RX-8 Clear Side Marker Lights -04-08 RX-8 Clear Side Marker Lights - 04-08 Upgrade the appearance of your RX-8 with a pair of these "Japanese-spec" clear side marker lights. Direct from Japan, these clear side markers are a genuine Mazda product and are fully adaptable with the original... More Info
	Enkei Center Caps for RP-F1 These center caps are for 16 and 17 inch and 18 inch Enkei RP-F1 only! They do not make a center cap for the 15 inch size and these caps will NOT fit the 15 inch size. It is unfortunate that Enkei has gone to these very expensive fancy metal caps, we... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton