RX8 2004-2011: Interior

Voodoo Knob Magnum Black Finish :: All

Shifting pleasure....good fit. Note that we only sell the "magnum" version of the round which is not as big as it sounds and has the right weight to work just right.

Customers who bought Voodoo Knob Magnum Black Finish :: All also often bought:
	RX8 Hawk #: HB378Z.565 Performance Ceramic Rear Pads Performance Ceramic Quiet, Clean, Safe and Fast Stopping. Hawk Performance introduces a unique ceramic composite formulation specifically developed to meet the ultra-low dust and low noise attributes of Original Equipment ceramic brake pads while... More Info
	Oil Temperature and Pressure Sensor Adapter Oil Pressure and Temperature Sensor Adapter for RX-8. The Oil Pressure and Temperature Sensor Adapter unit allows for easy installation of sender units for most popular gauges (1/8-inch female pipe for oil pressure and 3/8-inch female pipe for oil... More Info
	RX8 Hawk HB470Z.643 RX8 Performance Ceramic Front Pads Performance Ceramic Quiet, Clean, Safe and Fast Stopping. Hawk Performance introduces a unique ceramic composite formulation specifically developed to meet the ultra-low dust and low noise attributes of Original Equipment ceramic brake pads while... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton