Mazda3 2005-2012: Suspension

CG-Lock Seat Belt Lock

A favorite for autocrossers. The CG-Lock is engineered to lock the lap belt portion of your seat belt in position, keeping the bodys center of gravity firmly in place even through the most demanding cornering and braking maneuvers. The CG-Lock provides about 80% of the holding power of a full race harness. Does not interfere with seat belt safety. Installs in seconds.

Customers who bought CG-Lock Seat Belt Lock also often bought:
	Console Knee Pad This custom-molded pad is designed to be installed on the driver side (left) of the console. Made from black urethane foam that is both durable and easy-to-clean, but looks great and retains a factory look. A full 11/2" at it s thickest point, your... More Info
	Eibach Pro Kit Springs Approx. Lowering - Front: 1.4" Rear: 1.2" Eibach's Pro-Kit is their premium suspension product. These are sport lowings springs, and they improve handling while lowering your car. More Info
	Mishimoto 1.3 Bar Radiator Cap This replacement radiator cap will offer more efficient cooling with its higher heat resistance. Rated at 1.3 Bar (19 lbs) pressure. Model: MMRC-13L More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton