Miata 1990-2005: Exterior : Body Styling

Racing Beat Type II Wing :: 99-05

The Type II Rear Wing adds an aggressive edge to the Mazda s latest Miata. Manufactured in the USA using hand-laid fiberglass mat and easily prepped for final painting, the Type II Rear Wing readily attaches to the trunk lid with a simplified hardware kit. Installs in minutes using the supplied drilling guides and mounting hardware. If you can work a drill, you can install this wing!!!

Customers who bought Racing Beat Type II Wing :: 99-05 also often bought:
	Classic Speedster Tonneau::90-05 The appeal of a classic roadster can be captured with our Speedster Tonneau Cover! The Speedster Tonneau is offered exclusively by Moss Motors for your Miata. Precision engineered from design through manufacturing, our Tonneau is made from... More Info
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info
	Racing Beat Sway Bar Endlinks - Front or Rear::90-97 Adjustable HD (Heavy Duty) Sway Bar Links 1990-97 (Front and Rear) These Racing Beat-designed are a direct swap with the Miata factory links and provide the performance enthusiast the ability to set either front or rear sway bars to a "neutral position"... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton