Miata 1990-2005: Brakes : Pads

HAWK HPS FRONT Pads for Wilwood Caliper Big Brake Kit

Step up from your standard factory Miata brake pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These Miata brake pads are for our Wilwood Caliper Big Brake kits.

Customers who bought HAWK HPS FRONT Pads for Wilwood Caliper Big Brake Kit also often bought:
	Racing Beat Side Skirts::90-97 Racing Beat's Lower Side Skirts carry the Racing Beat inspired styling theme form front to rear, integrating nose and bumper components to provide a transition from the mild factory styling to the aggressive look seen here. SHIPPING NOTE: These... More Info
	KOYO 55mm R1139 Aluminum High Performance Miata Radiator::90-97 DOUBLE the capacity of the stock Miata radiator!!! The best Miata radiator at the best price. Made by Koyo of Japan, maker of OEM radiators. This Miata radiator takes care of overheating issues forever. All aluminum construction, polished tanks,... More Info
	Custom Miata Seat Rail for RACE SEATS....PASSENGER SIDE::1990-2005 Finally, a convenient way to get a race seat into your NA/NB. PASSENGER SIDE only! NOT a general purpose mount!!! These are custom made to match the holes in the floor of your NA/NB Miata which mount your factory seat. These make race seats a bolt in! ... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton