Miata 1990-2005: Wheels and Tires

Konig 15x8 "WIDEOPEN" 25mm, 4x100, mounted and balanced with four Nitto NeoGen All-Season PERFORMANCE Tires and our McGARD Spline Drive Lock Lugs...SAVE! :: 90-05

Brand new 15x8 WideOpen "All Silver" 25mm fitment with four brand new Nitto NeoGen 205/50/15 All-Season PERFORMANCE TIRES Mounted and Balanced. Includes our incredible McGard Spline Drive lug and tool set which includes the patented two-piece McGard lugs and key. Also includes our hubcentric rings for installation on a Miata.

Customers who bought Konig 15x8 "WIDEOPEN" 25mm, 4x100, mounted and balanced with four Nitto NeoGen All-Season PERFORMANCE Tires and our McGARD Spline Drive Lock Lugs...SAVE! :: 90-05 also often bought:
	EBC Green Stuff Brake Pads - Front::94-00 Green Stuff, EBC's popular formulation for use on fast street or light duty race use. Good bite from cold and effective to 550 degrees Celcius. Low dust and Asbestos Free. SORRY, OUT OF STOCK> More Info
	Koyo Performance Radiator Cap Koyo designs its radiators to take all factory spec parts which means your factory cap will fit, and your factory plug will fit, and your factory fans will bolt right on. But for those who want an upgraded new cap to go with their new Miata Koyo... More Info
	EBC Green Stuff Brake Pads - Rear::94-00 Green Stuff, EBC's popular formulation for use on fast street or light duty race use. Good bite from cold and effective to 550 degrees C. Low dust and Asbestos Free. SORRY, OUT OF STOCK More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton