RX8 2004-2011: Intakes

REVi Intake Kit---REPLACEMENT FILTER ELEMENT :: All 2004-2009

We offer the replacment filter for use in the Racing Beat REVi Intake Kit for the RX-8. This is a genuine KandN air filter element that is custom-made for use only in the REVi kit.

Customers who bought REVi Intake Kit---REPLACEMENT FILTER ELEMENT :: All 2004-2009 also often bought:
	TECHNAFIT RX8 Brake Lines::04+ Our Techna-Fit RX8 brake line kits come complete with all of the fittings and bolts for easy assembly. Techna-Fit high performance stainless braided RX8 brake lines eliminate the mushy pedal feel you get when your OEM rubber RX8 brake lines expand. All... More Info
	Enkei RP-F1 18x9.5, 45mm offset 5x114 Lighter and less expensive than SSRs in this size at only 17.4 pounds for 9.5 inches wide and this special order from Enkei in the 45mm offset FITS all four corners of your RX8. Don't be fooled into running the staggered front and rear wheel sizes so... More Info
	Racing Beat RX8 Header -- SALE!::04-09 After many months of engine dyno testing, production refinements, and a couple of supplier turnovers, Racing Beat has released their RX-8 header! As developed and tested on Racing Beat's engine dyno, the Racing Beat header produced a peak horsepower... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton