Konig Rewind 40mm Graphite--15x7, 40mm

Finally Here! We asked and begged Konig to make us a version of this classic mini-lite style wheel in a Miata offset and 15x7. Finally done, the Panasport look at half the price and lighter weight! Weighs 14.6 pounds on our scale. See great pictures of these on a new MazdaSpeed Miata and other Miatas in our wheel gallery in our forum. Remember to order hubcentric rings if you want them, this wheel takes a standard 73/54 ring. Center Caps NOT included with this wheel so order them separate on this website if you want them. Yes, they fit factory big brake kits and our big brake kits. Stock lugs fit but is very tight and will need a thin wall socket, better to use a narrow lug like our spline drive lugs. See the picture below FULL SIZE in our forum wheel gallery. Note that similar looking wheels are usually over over 15 pounds and/or low pressure cast (the lowest quality) and we have always believed that any wheel over 15 pounds is just TOO HEAVY for a Miata. Moreover, this Rewind costs less despite a higher quality casting method and they also have better brake clearance, fitting all years and aftermarket big brake kits. Want more pictures? Click into our forum and check the "REWIND" section of our wheel gallery. Our tire recommendation for street use is the light weight but ultra high performance Toyo T1R which we can mount and balance for you on our top of the line Hunter computerized mounting system.