Thank you. You have rated this product.
The ClearView is available in three finishes; Black powdercoat - after manufacturing, the rollbars are shot-blasted to remove any mill scale from the steel, then they go through a 7-step cleaning process, then a 60% gloss powder is electrostatically applied and baked at over 400 degrees to get a hard durable finish. Polished Stainless - high quality 304 stainless tubing and flat parts are hand polished to a shiny finish. Unfinished - the color and finish of the rollbar is completely up to you.
One key to the Boss Frog Clearview's strength is the rear brace foot. The foot is a formed triangle, which provides lateral support to the vertical hoop brace. Other manufacturers weld a flat plate on the brace tube, which gives no structural support at all to the brace. In rollover testing per SCCA guidelines, this rear brace foot helped support the vertical brace tube, passing the testing with almost no deflection. The installation instructions are also available on request.
A frequent question is how to attach a harness for tracking days. One way is to attach a harness is to wrap it directly around the rollbar. The Boss Frog rear vertical brace is within the SCCA rule of being 20 degrees from the centerline of the seat. This means that harness straps can be wrapped directly around the vertical brace, just below the diagonal brace. And the best choice is the BossFrog Bolt In Harness Bar
NOTE: Although our store will charge you shipping all these ship factory direct with $70 flat rate shipping within lower 48 states of USA, we will adjust all shipping charges to the flat rate of $70. NOTE: BossFrog now makes this bar in both standard and MAXX design. The MAXX leans back a little for more headroom but at the cost of fitment with the factory hardtop...we offer both choices. Please email or call us with questions.
Image Below Shows closeup views of the THREE choices of finish with the BossFrog Bars. Top is standard black, middle is SILVER, and bottom choice is polished Stainless Steel.