RX8 2004-2011: Wheels and Tires : Accessories

Hubcentric ring 73/67

Most modern aftermarket rims are made with an oversize center bore and the centering ring brings that bore size down to the RX8 hub fitment of 67.1mm. These are the rings for the Enkei wheels you see on this page for fitment of RX8 rims. Folks ask me all the time if these are "required" and I must say that they are a convenience item. Track racers usually skip them and use their knees to center the wheel while the lugs go in, street users usually get the rings to avoid the trouble. This is the size you need to put RP-F1 wheels on your RX8.

Customers who bought Hubcentric ring 73/67 also often bought:
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent loosening up under load), and a wheel lock. An RX8 takes 20 of these and ordering... More Info
	Enkei RP-F1 18x9.5, 45mm offset 5x114 Lighter and less expensive than SSRs in this size at only 17.4 pounds for 9.5 inches wide and this special order from Enkei in the 45mm offset FITS all four corners of your RX8. Don't be fooled into running the staggered front and rear wheel sizes so... More Info
	Enkei Center Caps for RP-F1 These center caps are for 16 and 17 inch and 18 inch Enkei RP-F1 only! They do not make a center cap for the 15 inch size and these caps will NOT fit the 15 inch size. It is unfortunate that Enkei has gone to these very expensive fancy metal caps, we... More Info