Thank you. You have rated this product.
Racing Beat's extremely popular REVi RX8 Intake System for all RX-8 applications. Designed to offer performance improvements without sacrificing drivability, the Racing Beat intake system is the final result of hundreds of hours of dyno test sessions and on-road testing.
The major components of the REVi Intake and Duct Combo include: an OEM style air box assembly, custom-designed KandN air filter unit, aluminum mass air flow sensor tube, a tuned-length air inlet horn, and a nose-mounted intake air duct.
Unlike many of the aftermarket intake systems on the market, the Racing Beat intake system retains one of the important mesh screens to aid with the even distribution of airflow across the mass air sensor. The inclusion of this screen minimizes the possibility of rough idle issues that may occur if both stock screens are eliminated. Working with the design team at KandN Engineering, a high capacity air filter was developed that allowed us to position a tuned-length intake horn inside the filter body. This filter design allowed us to fine-tune the length of the air horn to maximize the performance potential. We have noted that many aftermarket intake systems for the RX-8 incorporate a large air filter, which is then connected to the intake manifold with a length of plastic or metal tubing. In many cases, the size of the filter that has been selected will dictate the length of tubing required, severely limiting the critical tuning importance of the air intake tube!
Included with this combo kit is our Ram Air Duct which converts your intake into a true "cold air" system. The inlet of this duct is positioned in the mouth opening of the RX-8 and funnels cooler ambient air directly into the REVi Intake chamber. The REVi intake system addresses one of the most common complaints that we hear regarding aftermarket intakes for the RX-8 " extremely loud intake noise! Although a simple unshielded tube-and-filter intake system may produce respectable top end power, the noise levels that are produced are unbearably loud.
During initial testing with one of more popular aftermarket units, Racing Beat recorded a full-throttle sound level reading of over 90 db inside the car, with the windows rolled up! Compared to the stock sound level, we believe that you will soon tire of this type of rocket-racer intake buzz. The REVi intake produces a much more modest intake sound with only a 2-3 db increase over the stock system. As described on by one of our prototype test volunteers, This intake is definitely louder than the factory unit, but not unreasonably so. It actually sounds deep and pretty darn good.
Notes: The original MAF sensor is retained for use with this intake, a replacement is not supplied with this kit. *Legal in California only for racing vehicles, which may never be used upon a highway.