Miata 1990-2005: Car Care, Tools and Shop Supplies

Race Ramps -- ULTRA LIGHT composite with ultra low approach angle.


Race Ramps -- ULTRA LIGHT composite with ultra low approach angle.
Part Number: 60-1108
Price: $199.00
Quantity:

Imagine a ramp you can lift with two fingers....and yet it will let even your lowered Miata climb up WITHOUT dragging the bottom lip. Here it is....Brute Industries 56 inch Race Ramps are unique in their design. These specific ramps are made for low ground clearance performance vehicles with a gross weight handling of 1200 pounds per ramp or 2400 pounds per set. These ramps are specially designed for the sports car enthusiast, allowing you to get under your car quickly, safely and without any frustrating hassles. Constructed in one solid piece, Race Ramps will not slide across your garage floor, dig into your asphalt driveway, or scratch or otherwise damage your cement or painted floors. They can be used to raise your car up eight inches and you will never have to worry about rust! You get all of this in an unbelievably light weight of Twenty pounds a pair! Plus, you can use these ramps on grass, gravel or almost any other flat surface. While most ramps can only accommodate a tire width of six to eight inches, these standard Race Ramps will work for tires up to ten inches wide. And all at a weight that you just won't believe! Because of their light weight, Race Ramps are ideal for packing and transporting through any terrain. They don't have to take up precious storage space, either, as they can easily be strapped to the outside of the support rig. When you get to the next service station, you just grab them and go! Race Ramps are not hollow in the center or made with questionable reinforcements. They are 100% solid on all sides and constructed in one solid piece "giving you the nonskid support that you need! The ramps come complete with straps for easy carrying, and you can also use them to hang the ramps on the wall when you're done. Price is per pair.


Customers who bought Race Ramps -- ULTRA LIGHT composite with ultra low approach angle. also often bought:

Mityvac Mityvac
This popular vacuum/pressure pump is perfect for bleeding hydralic systems. Includes: vacuum/pressure pump, vacuum gauge, tubing, reservoir jar and instructions. More Info
Glove Box Organizer::99-04 Glove Box Organizer::99-04
Our glove box organizer combines convenience and storage for your maps, sunglasses and CD's. More Info
Colored Silicone Vacuum Hose Kits - Super Blue::90-04 Colored Silicone Vacuum Hose Kits - Super Blue::90-04
Its easy to create a whole new look for your Miata by simply replacing your cars OEM hoses with these brilliantly colored silicone hose kits. Besides enhancing appearance, replacing the hoses under your hood can actually cure mysterious problems... More Info
Sign Up for our Newsletter
Mazda Talk Forums

Installation Instructions

Re: NC Header Installation

Another set of very complete installation instructions by a customer at Miata.net forum:http://forum.miata.net/vb/showthread.ph ... ost4703239
Posted by Brian

Re: AEM Install for NB

With Brian's help, I was able to get the nut off using some liquid wrench. Applied and let it sit for 4-6 hours, and used a vice grip wrench. Still took some...
Posted by Gecko

AEM with MonsterFlow coolbox Install for NB

Anyone else install the AEM short ram intake had trouble loosening the power steering pump nut? I am still not able to get it off and even took it to a shop ...
Posted by Gecko

Re: NC Goodwin trunk spoiler install

One other question:Is the spoiler made with polyester resin or epoxy resin? Apparently, that makes a difference when painting.Thanks
Posted by slartibartfast

Re: NC Header Installation

Brian,Great. Thanks for the info. As you may have guessed, I'm trying to plan out my next mods. It's tough, since I only have short periods of time to work ...
Posted by skeeler

Mazda Talk Forum
Mazda Talk Forums

Installation Instructions

Re: NC Header Installation

Another set of very complete installation instructions by a customer at Miata.net forum:http://forum.miata.net/vb/showthread.ph ... ost4703239
Posted by Brian

Re: AEM Install for NB

With Brian's help, I was able to get the nut off using some liquid wrench. Applied and let it sit for 4-6 hours, and used a vice grip wrench. Still took some...
Posted by Gecko

AEM with MonsterFlow coolbox Install for NB

Anyone else install the AEM short ram intake had trouble loosening the power steering pump nut? I am still not able to get it off and even took it to a shop ...
Posted by Gecko

Re: NC Goodwin trunk spoiler install

One other question:Is the spoiler made with polyester resin or epoxy resin? Apparently, that makes a difference when painting.Thanks
Posted by slartibartfast

Re: NC Header Installation

Brian,Great. Thanks for the info. As you may have guessed, I'm trying to plan out my next mods. It's tough, since I only have short periods of time to work ...
Posted by skeeler

Mazda Talk Forum
Home About Us Customer Care Technical FAQs Mazda Talk Forums Contact Us

Your Cart | Checkout

Click Model Year
Miata 1990-2005
MX5 2006-2010
RX8 2004-2010
Mazda6 2003-2010
RX7 1979-1995
Mazda3 2005-2010
Need Shipping Quote?
Home About Us Customer Care Technical FAQs Mazda Talk Forums Contact Us
Good-Win Racing Mazda Performance Parts