Tokico D-Spec Shocks Cables (set of two)

Although the D-spec rear shocks are fully adjustable on the RX-8, accessing the adjustment knob after the shocks are installed on the car is virtually impossible. The design of the rear suspension places the tops of the shocks in a recessed area on either side of the trunk area. Further, once the shocks are installed and the retaining brackets are replaced, the tops of the shocks are buried deep inside this recessed area. To address limited access issues such as this, Tokico has developed a set of Extension Adjustment Cables that will allow remote adjustment of the D-Spec Shocks. Offered as set of two (2), these cables are mounted to the tops of the rear shocks during the installation, and routed up into the truck area. On our RX-8, we simply drilled a small hole in the trunk liner and positioned the adjustment knob in a very accessible location. Now, making adjustments to the rear shock is extremely quick and easy!