Miata 1990-2005: Suspension : Shocks

NEW KONI RACE shock Rear :: 1990-2005

Finally here, shorter bodies and MUCH more aggressive valving combine for a motorsports legend in the making. Koni's RACE valved shocks for the Miata are perfect for use with high spring rates such as those that come with our Ground Control Coilover kits.

Price is PER SHOCK...but only sold in pairs so order two of each.

BRIAN's APPLICATION NOTES: Designed to be used with threaded body coilover conversion.....such as our Ground Control Kits. AND...don't forget upgraded bumpstops (see our FCM bumpstops and shock install kits).

Customers who bought NEW KONI RACE shock Rear :: 1990-2005 also often bought:
	NEW KONI RACE shock Front::1990-2005 A full inch shorter bodies and MUCH more aggressive valving combine for a motorsports legend in the making. Koni's new RACE shocks for the Miata are perfect for use with high spring rates such as those that come with our Ground Control Coilover kits. ... More Info
	Ground Control Miata Coilover Conversion 550/350::90-97 Adjustable coil-overs allow easy adjustment of Miata ride height and the ability to adjust the weight at each corner. With this simple sleeve design, any shock can now be a race ready coil-over. Ride height is adjustable from stock to 2" lower and... More Info
	Racing Beat Rear Miata Sway Bar - Solid ALL years Our favorite Miata sway bar....Racing Beat-designed Miata sway bars reduce chassis roll in turns and increase your Miata's sensitivity to steering inputs, thereby improving maximum cornering power. Substantial engineering effort, select steel... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton