Good-Win Racing Mazda Performance Parts

Slotted Rotors - FRONT

2004-2010 · S Model Only

Mazda3 2004-2017 · Brakes


Part Number: 60-1197

Year: 2004-2010

Application: S Model Only

Price: $94.00

Quantity:

Slotted Rotors - FRONT
rating (0 Ratings)
rating (0 Ratings)

Thank you. You have rated this product.

Top quality Mazda 3 Rotors. The highest quality alloyed gray iron composition is heat treated to relieve casting stress, straight slots, surface EDP Coating w/cross cut grinding on friction surface. These Mazda 3 rotors are dynamically balanced after slotting to ensure vibration-free use at high speed. The slots wipe away the white-hot boundary layer from the disc and pad to increase braking efficiency, also particularly helpful in wet conditions. The rotor is painted using an "electro-deposition" process for the very best in rust prevention. Price is per rotor but minimum order is 2....so order two so you get a left and right!

("S" model only)

*** Product images may differ from actual product appearance ***

REVIEWS

After reading many other positive reviews on both the GWR and Miata forums I finally decided to buy this product. My main concern for many months was whether or not I was up to the task of installing the header. But with the excellent instructions on Brian's forum as well as several Miata forum threads it turned out easier than I expected. After receiving notice that the header would arrive on a Friday afternoon, I began the disassembly process. After about 3 hours I had the stock manifold out. Later that afternoon the new catted header arrived right on schedule. And it is a thing of beauty. I opted for the stainless version. Installation on Saturday morning took another 3 hours, although I could have shaved some time off of that but I was actually enjoying the process of double checking torque values and cleaning up my engine compartment. I already have the GWR catted midpipe, so that connection was a snap. I put everything back together, reconnected my battery, and went for a drive. NO CODES! Nice throaty sound with my RSII muffler, and a significant boost in power and low/mid torque. Another happy camper here. I since have added a M-E tune and I feel I have realized all of the gains that Brian has achieved on his 2012 project Miata. I've put several hundred miles on my Miata since the install with zero problems. This is the car that Mazda should have built all along. Thanks Brian.

-- Ron P.

Thanks for making this work and providing great customer service! I had a full weekend with the install, but man was it worth it. The flywheel was such a good choice. I can't believe how much easier rev-matching down shifts are. The ACT is surprisingly easy to live with, even with the engagement point very low. I'll tackle that when it stops raining. Thanks again for making this happen this weekend.

-- Brian H

REVIEWS

After reading many other positive reviews on both the GWR and Miata forums I finally decided to buy this product. My main concern for many months was whether or not I was up to the task of installing the header. But with the excellent instructions on Brian's forum as well as several Miata forum threads it turned out easier than I expected. After receiving notice that the header would arrive on a Friday afternoon, I began the disassembly process. After about 3 hours I had the stock manifold out. Later that afternoon the new catted header arrived right on schedule. And it is a thing of beauty. I opted for the stainless version. Installation on Saturday morning took another 3 hours, although I could have shaved some time off of that but I was actually enjoying the process of double checking torque values and cleaning up my engine compartment. I already have the GWR catted midpipe, so that connection was a snap. I put everything back together, reconnected my battery, and went for a drive. NO CODES! Nice throaty sound with my RSII muffler, and a significant boost in power and low/mid torque. Another happy camper here. I since have added a M-E tune and I feel I have realized all of the gains that Brian has achieved on his 2012 project Miata. I've put several hundred miles on my Miata since the install with zero problems. This is the car that Mazda should have built all along. Thanks Brian.

-- Ron P.

Thanks for making this work and providing great customer service! I had a full weekend with the install, but man was it worth it. The flywheel was such a good choice. I can't believe how much easier rev-matching down shifts are. The ACT is surprisingly easy to live with, even with the engagement point very low. I'll tackle that when it stops raining. Thanks again for making this happen this weekend.

-- Brian H