Mazda3 2004-2012: Interior

Voodoo Knob Magnum Pearl Finish

Mazda shifting pleasure....lowers and shortens the shift. Note that we only sell the "magnum" version of the famous mazda voodoo knob round, which is not as big as it sounds and has the right weight to work just right through the gates. Shortens the shift by about a quarter inch...and a lot easier than installing a short shift kit.

Customers who bought Voodoo Knob Magnum Pearl Finish also often bought:
	Mazda3 AEM Cold Air Intake System - 2.3L Manual Transmission: AEM 21-488P::2004-2008 The AEM Mazda 3 Intake. One of the best ways to increase the performance of your Mazda 3 is to allow the engine to breathe more freely. The stock Mazda 3 intake is restrictive by its design to allow use of inexpensive flat paper filters. In order for the... More Info
	KOYO 55mm R1139 Aluminum High Performance Miata Radiator::90-97 DOUBLE the capacity of the stock Miata radiator!!! The best Miata radiator at the best price. Made by Koyo of Japan, maker of OEM radiators. This Miata radiator takes care of overheating issues forever. All aluminum construction, polished tanks,... More Info
	Hubcentric Ring set to Fit Mx5 73/67 Most modern aftermarket rims are made with an oversize center bore and the centering ring brings that bore size down to the Mazda fitment of 67.1 mm. These help to properly fit your new Mazda wheels. Price is for set of FOUR rings. Brian's application... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton