RX8 2004-2011: Interior

Voodoo Knob Magnum Pearl Finish

Shifting pleasure....good fit. Note that we only sell the "magnum" version of the round which is not as big as it sounds and has the right weight to work just right.

Customers who bought Voodoo Knob Magnum Pearl Finish also often bought:
	RX8 ULTRA Spark Plug Wires Racing Beat s ULTRA 8mm wire sets are constructed with zinc-plated high-strength copper wire to prevent corrosion. Threaded brass connectors are crimped to all wire ends to provide a superior connection. The silicone rubber used will handle over 100,000... More Info
	Tokico D-Spec Shocks Cables (set of two) Although the D-spec rear shocks are fully adjustable on the RX-8, accessing the adjustment knob after the shocks are installed on the car is virtually impossible. The design of the rear suspension places the tops of the shocks in a recessed area on either... More Info
	MAX RX8 STREET Tire Combo of Enkei 18x9.5 RP-F1 Mounted and Balanced with TOYO T1 Sport 275/35/18 Tires. Our most popular pure STREET tire for the RX8 on our most popular rim for the RX8. This is our max fitment pure street tire combo that will fit with stock fenders if you are not lowered....and on lowered cars with stock fenders if you either run... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton