Mazda3 2004-2012: Suspension

Eibach Pro Kit Springs

Approx. Lowering - Front: 1.4" Rear: 1.2" Eibach's Pro-Kit is their premium suspension product. These are sport lowings springs, and they improve handling while lowering your car.

Customers who bought Eibach Pro Kit Springs also often bought:
	CG-Lock Seat Belt Lock A favorite for autocrossers. The CG-Lock is engineered to lock the lap belt portion of your seat belt in position, keeping the bodys center of gravity firmly in place even through the most demanding cornering and braking maneuvers. The CG-Lock provides... More Info
	Mazda3 AEM Cold Air Intake System - 2.3L Manual Transmission: AEM 21-488P::2004-2008 The AEM Mazda 3 Intake. One of the best ways to increase the performance of your Mazda 3 is to allow the engine to breathe more freely. The stock Mazda 3 intake is restrictive by its design to allow use of inexpensive flat paper filters. In order for the... More Info
	NEW Racing Beat MX5 Miata Sway Bar COMBO Front and Rear::2006-2012 Racing Beat-designed NC Generation MX5 Miata sway bars reduce chassis roll in turns and increase your Miata's sensitivity to steering inputs, thereby improving maximum Miata cornering power. Substantial engineering effort, select steel alloys, and precise... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton