Mazda3 2004-2012: Suspension

Eibach Pro Kit Springs for MAZDASPEED3 :: 2007-2009

Approx. Lowering - Just about inch for you MZR owners, enough to take away the gap, but not so much that you need a camber correction kit for street use. Again, NO camber correction kits needed for this choice. Front lowering: 0.8 in Rear lowering: 0.7 in Eibach's Pro-Kit is their premium suspension product. These are sport lowings springs, and they improve handling while lowering your car.

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton