RX8 2004-2010: Wheels and Tires: Wheels
Enkei RP-F1 17x9, 45mm offset 5x114, 15.9 pounds
Customers who bought Enkei RP-F1 17x9, 45mm offset 5x114, 15.9 pounds also often bought: |
|
|
McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. An RX8 takes 20 of these and ordering... More Info
|
|
REVi Intake Kit::All 2004-2009 After months of exhaustive development and testing, Racing Beat sent us a prototype and it worked great and now we sell the Racing Beat RX8 REVi Intake System. Designed to offer RX8 performance improvements without sacrificing drivability, the Racing Beat... More Info
|
|
TOYO R888 INTRO SPECIAL---255/40/17 RX8 Track Tires Mounted and Balanced! TOYO R888 track day tires as used on our MazdaSport Magazine Project RX8. The R888 uses a unique semi-slick shoulder area, continuous center contact, and enhanced R compound combined with the V-shaped tread design make the R888 ideal for road racing,... More Info
|

Installation Instructions
Re: NC Header Installation
Another set of very complete installation instructions by a customer at Miata.net forum:http://forum.miata.net/vb/showthread.ph ... ost4703239
Posted by Brian
Re: AEM Install for NB
With Brian's help, I was able to get the nut off using some liquid wrench. Applied and let it sit for 4-6 hours, and used a vice grip wrench. Still took some...
Posted by Gecko
AEM with MonsterFlow coolbox Install for NB
Anyone else install the AEM short ram intake had trouble loosening the power steering pump nut? I am still not able to get it off and even took it to a shop ...
Posted by Gecko
Re: NC Goodwin trunk spoiler install
One other question:Is the spoiler made with polyester resin or epoxy resin? Apparently, that makes a difference when painting.Thanks
Posted by slartibartfast
Re: NC Header Installation
Brian,Great. Thanks for the info. As you may have guessed, I'm trying to plan out my next mods. It's tough, since I only have short periods of time to work ...
Posted by skeeler


Installation Instructions
Re: NC Header Installation
Another set of very complete installation instructions by a customer at Miata.net forum:http://forum.miata.net/vb/showthread.ph ... ost4703239
Posted by Brian
Re: AEM Install for NB
With Brian's help, I was able to get the nut off using some liquid wrench. Applied and let it sit for 4-6 hours, and used a vice grip wrench. Still took some...
Posted by Gecko
AEM with MonsterFlow coolbox Install for NB
Anyone else install the AEM short ram intake had trouble loosening the power steering pump nut? I am still not able to get it off and even took it to a shop ...
Posted by Gecko
Re: NC Goodwin trunk spoiler install
One other question:Is the spoiler made with polyester resin or epoxy resin? Apparently, that makes a difference when painting.Thanks
Posted by slartibartfast
Re: NC Header Installation
Brian,Great. Thanks for the info. As you may have guessed, I'm trying to plan out my next mods. It's tough, since I only have short periods of time to work ...
Posted by skeeler







